55degree Solid carbide end mill,4flute end mill cutter,8mm carbide
end mill, square cutting end mill
Features:
Shank Length:50,75,100,150mm or as per customized.
Helix: 30 degree
Flute number: 2, 4
1,Advanced BALZAC coating after-treatment technology, for closer
combination with substrate, lower friction and superior surface
quality.
2,Has excellent milling performance in both dry and wet milling.
3,Wide milling function: side milling, profiling, face milling, and
plunging etc
Popular standard size(Can be available from stock, ready to ship):
| D Cutting Dia.(mm) | d Shank Dia.(mm) | Lc Cutting length(mm) | L Overall length(mm) |
| 1 | 4 | 3 | 50 |
| 2 | 4 | 6 | 50 |
| 3 | 6 | 9 | 50 |
| 4 | 6 | 12 | 50 |
| 5 | 6 | 13 | 50 |
| 6 | 6 | 18 | 50 |
| 7 | 8 | 21 | 60 |
| 8 | 8 | 24 | 60 |
| 9 | 10 | 27 | 75 |
| 10 | 10 | 30 | 75 |
| 12 | 12 | 36 | 75 |
| 14 | 14 | 48 | 100 |
| 16 | 16 | 48 | 100 |
| 18 | 18 | 48 | 100 |
| 20 | 20 | 48 | 100 |
Remark:
1,Betalent carbide keeps stock for standard size listed, ready to
ship in most situations.
2,Size beyond this list can be customised as per drawing or sample.
3,Different grades carbide can be applied base on work piece
character specially the hardness.
For milling workpiece of which hardness is below HRC 50 to 55
degree, carbide grade BT50 is applied as raw material(ground
carbide rod), BT45 has below physical characters:
| Grade | Co% | Grain Size | Density (g/cm) | Hardness(HRA) | TRS N/mm2 | Application |
| BT50 | 10 | 0.6 | 14.45 | 92.3 | 4400 | For general drill bit, end mill machining titanium alloy, stainless
steel and gray cast iron. |
1,Selected raw material, the big brand original carbide rod enable
Betalent’s end mill with high strength,abrasion resistant and long
tool life.
2,Sharp cutting edges, high performance, universal machining.
3,Advanced BALZAC coating after-treatment technology, for closer
combination with substrate, lower friction and superior surface
quality
Please Contact Us for Further Details.
